# Broadcasting#

See also

The term broadcasting describes how NumPy treats arrays with different shapes during arithmetic operations. Subject to certain constraints, the smaller array is “broadcast” across the larger array so that they have compatible shapes. Broadcasting provides a means of vectorizing array operations so that looping occurs in C instead of Python. It does this without making needless copies of data and usually leads to efficient algorithm implementations. There are, however, cases where broadcasting is a bad idea because it leads to inefficient use of memory that slows computation.

NumPy operations are usually done on pairs of arrays on an element-by-element basis. In the simplest case, the two arrays must have exactly the same shape, as in the following example:

```
>>> import numpy as np
>>> a = np.array([1.0, 2.0, 3.0])
>>> b = np.array([2.0, 2.0, 2.0])
>>> a * b
array([2., 4., 6.])
```

NumPy’s broadcasting rule relaxes this constraint when the arrays’ shapes meet certain constraints. The simplest broadcasting example occurs when an array and a scalar value are combined in an operation:

```
>>> import numpy as np
>>> a = np.array([1.0, 2.0, 3.0])
>>> b = 2.0
>>> a * b
array([2., 4., 6.])
```

The result is equivalent to the previous example where `b`

was an array.
We can think of the scalar `b`

being *stretched* during the arithmetic
operation into an array with the same shape as `a`

. The new elements in
`b`

, as shown in Figure 1, are simply copies of the
original scalar. The stretching analogy is
only conceptual. NumPy is smart enough to use the original scalar value
without actually making copies so that broadcasting operations are as
memory and computationally efficient as possible.

The code in the second example is more efficient than that in the first
because broadcasting moves less memory around during the multiplication
(`b`

is a scalar rather than an array).

## General broadcasting rules#

When operating on two arrays, NumPy compares their shapes element-wise. It starts with the trailing (i.e. rightmost) dimension and works its way left. Two dimensions are compatible when

they are equal, or

one of them is 1.

If these conditions are not met, a
`ValueError: operands could not be broadcast together`

exception is
thrown, indicating that the arrays have incompatible shapes.

Input arrays do not need to have the same *number* of dimensions. The
resulting array will have the same number of dimensions as the input array
with the greatest number of dimensions, where the *size* of each dimension is
the largest size of the corresponding dimension among the input arrays. Note
that missing dimensions are assumed to have size one.

For example, if you have a `256x256x3`

array of RGB values, and you want
to scale each color in the image by a different value, you can multiply the
image by a one-dimensional array with 3 values. Lining up the sizes of the
trailing axes of these arrays according to the broadcast rules, shows that
they are compatible:

```
Image (3d array): 256 x 256 x 3
Scale (1d array): 3
Result (3d array): 256 x 256 x 3
```

When either of the dimensions compared is one, the other is used. In other words, dimensions with size 1 are stretched or “copied” to match the other.

In the following example, both the `A`

and `B`

arrays have axes with
length one that are expanded to a larger size during the broadcast
operation:

```
A (4d array): 8 x 1 x 6 x 1
B (3d array): 7 x 1 x 5
Result (4d array): 8 x 7 x 6 x 5
```

## Broadcastable arrays#

A set of arrays is called “broadcastable” to the same shape if the above rules produce a valid result.

For example, if `a.shape`

is (5,1), `b.shape`

is (1,6), `c.shape`

is (6,)
and `d.shape`

is () so that *d* is a scalar, then *a*, *b*, *c*,
and *d* are all broadcastable to dimension (5,6); and

*a*acts like a (5,6) array where`a[:,0]`

is broadcast to the other columns,*b*acts like a (5,6) array where`b[0,:]`

is broadcast to the other rows,*c*acts like a (1,6) array and therefore like a (5,6) array where`c[:]`

is broadcast to every row, and finally,*d*acts like a (5,6) array where the single value is repeated.

Here are some more examples:

```
A (2d array): 5 x 4
B (1d array): 1
Result (2d array): 5 x 4
A (2d array): 5 x 4
B (1d array): 4
Result (2d array): 5 x 4
A (3d array): 15 x 3 x 5
B (3d array): 15 x 1 x 5
Result (3d array): 15 x 3 x 5
A (3d array): 15 x 3 x 5
B (2d array): 3 x 5
Result (3d array): 15 x 3 x 5
A (3d array): 15 x 3 x 5
B (2d array): 3 x 1
Result (3d array): 15 x 3 x 5
```

Here are examples of shapes that do not broadcast:

```
A (1d array): 3
B (1d array): 4 # trailing dimensions do not match
A (2d array): 2 x 1
B (3d array): 8 x 4 x 3 # second from last dimensions mismatched
```

An example of broadcasting when a 1-d array is added to a 2-d array:

```
>>> import numpy as np
>>> a = np.array([[ 0.0, 0.0, 0.0],
... [10.0, 10.0, 10.0],
... [20.0, 20.0, 20.0],
... [30.0, 30.0, 30.0]])
>>> b = np.array([1.0, 2.0, 3.0])
>>> a + b
array([[ 1., 2., 3.],
[11., 12., 13.],
[21., 22., 23.],
[31., 32., 33.]])
>>> b = np.array([1.0, 2.0, 3.0, 4.0])
>>> a + b
Traceback (most recent call last):
ValueError: operands could not be broadcast together with shapes (4,3) (4,)
```

As shown in Figure 2, `b`

is added to each row of `a`

.
In Figure 3, an exception is raised because of the
incompatible shapes.

Broadcasting provides a convenient way of taking the outer product (or any other outer operation) of two arrays. The following example shows an outer addition operation of two 1-d arrays:

```
>>> import numpy as np
>>> a = np.array([0.0, 10.0, 20.0, 30.0])
>>> b = np.array([1.0, 2.0, 3.0])
>>> a[:, np.newaxis] + b
array([[ 1., 2., 3.],
[11., 12., 13.],
[21., 22., 23.],
[31., 32., 33.]])
```

Here the `newaxis`

index operator inserts a new axis into `a`

,
making it a two-dimensional `4x1`

array. Combining the `4x1`

array
with `b`

, which has shape `(3,)`

, yields a `4x3`

array.

## A practical example: vector quantization#

Broadcasting comes up quite often in real world problems. A typical example
occurs in the vector quantization (VQ) algorithm used in information theory,
classification, and other related areas. The basic operation in VQ finds
the closest point in a set of points, called `codes`

in VQ jargon, to a given
point, called the `observation`

. In the very simple, two-dimensional case
shown below, the values in `observation`

describe the weight and height of an
athlete to be classified. The `codes`

represent different classes of
athletes. [1] Finding the closest point requires calculating the distance
between observation and each of the codes. The shortest distance provides the
best match. In this example, `codes[0]`

is the closest class indicating that
the athlete is likely a basketball player.

```
>>> from numpy import array, argmin, sqrt, sum
>>> observation = array([111.0, 188.0])
>>> codes = array([[102.0, 203.0],
... [132.0, 193.0],
... [45.0, 155.0],
... [57.0, 173.0]])
>>> diff = codes - observation # the broadcast happens here
>>> dist = sqrt(sum(diff**2,axis=-1))
>>> argmin(dist)
0
```

In this example, the `observation`

array is stretched to match
the shape of the `codes`

array:

```
Observation (1d array): 2
Codes (2d array): 4 x 2
Diff (2d array): 4 x 2
```

Typically, a large number of `observations`

, perhaps read from a database,
are compared to a set of `codes`

. Consider this scenario:

```
Observation (2d array): 10 x 3
Codes (3d array): 5 x 1 x 3
Diff (3d array): 5 x 10 x 3
```

The three-dimensional array, `diff`

, is a consequence of broadcasting, not a
necessity for the calculation. Large data sets will generate a large
intermediate array that is computationally inefficient. Instead, if each
observation is calculated individually using a Python loop around the code
in the two-dimensional example above, a much smaller array is used.

Broadcasting is a powerful tool for writing short and usually intuitive code that does its computations very efficiently in C. However, there are cases when broadcasting uses unnecessarily large amounts of memory for a particular algorithm. In these cases, it is better to write the algorithm’s outer loop in Python. This may also produce more readable code, as algorithms that use broadcasting tend to become more difficult to interpret as the number of dimensions in the broadcast increases.

Footnotes